MILKING-PLUSTER
Pulsator
In order to perform a correct milking respecting the animal , it is necessary to apply a pulsating vacuum to the teats which perfectly imitates the action of a calf sucking. Milkline pulsators are specifically designed to best adapt to all types of milking providing optimal pulsation parameters for the health of the udder.
Milkline provides a range of pneumatic and electronic pulsators:
- pneumatic pulsators are the ideal solution for bucket and mobile milking systems or anytime it is impossible to use a stable and sufficient power supply.
- electronic pulsators compared to the pneumatic ones, allow better accuracy in pulsation rate and ratio.
ML 120
ML120 is the pneumatic pulsator which guarantees milking precision and long term reliability. It is made and tested in Italy following the strictest company regulations in compliance with ISO standards.
Made from high resistent polymers, it guarantees high wear resistance.
It needs minimal maintenance, due to its dry operation and to the innovative coupling SUREMATCH® system between the internal parts.
The RETROFIT® air filtrering system guarantees a 50% higher filtering capacity compared to the market standard.
Benefits for the farmer :
- Designed to be a long-lasting product fast.
- Uniform and constant milking.
- Adjustable frequency range of 50÷180 PPM
- Operating vacuum range of 35÷50kPa
- Internal parts 100% self-lubricating
- low stress for the animal
Servo Plus P4C
Servopulse P4C is an electronic pulsator with 4 independent pulsation channels. This pulsator is specifically designed for the Milpro P4C system.
Servopulse P4C is equipped with the 4 new independent channels distributor and allows the management of the individual pulsation for each cluster.
Servopulse P4C components are simple and efficient and its maintenance is easy and inexpensive.
The pulsation system is power-assisted through a solenoid controlled silicone membrane. This feature allows lower energy a reduction in electric energy consumption and makes the pulsators less subject to mechanical wear.
Servopulse P4C is extremely silent and is equipped with a connector, which can be easily connected to the air filtration system.
Smart Plus
Milkline proposes two types of electronic pulsators in the Smartpulse line:
- SmartPulse Master
- SmartPulse programmable.
The Smartpulse line is characterized by easy and efficient components and it allows simple and inexpensive maintenance. The pulsation system is power-assisted through a solenoid controlled silicone membrane. This feature allows a lower energy consumption of and makes the pulsators less subject to mechanical wear.
Smartpulse line Milkline pulsators are extremely silent and equipped with an internal air filter and a connector, which can be easily connected to the air filtration system.
They are easy to clean on-site by drawing water through the pulsation tubes, without any risk of damage to the electrovalves.
By choosing the SmarPulse line you will have a product that is:
- safe and efficient
- very silent
- built-up from few and simple components
- quick and easy maintenance
- low energy consumption
With SmartPulse Programmable you will also achieve:
- independent and programmable pulsation with 8 different rates (from 50 to -80 ppm) and 8 ratios (from 50/50 to 70/30)
- possibility to program shifted phase for 8 pulsator groups – , cascade system
- easy programming through the two buttons on the pulsator circuit board